The Bureau of Indian Standards is the national standard body of India, responsible for developing and implementing quality and safety standards across various sectors, including dentistry. BIS certificate for Dentistry ensures quality and safety compliance for dental products, assuring healthcare professionals and patients.
Obtaining BIS Certificate is mandatory for dentistry, as it helps ensure consumer safety and the quality of medical devices by adhering to regulatory standards. A BIS certification for dentistry is also essential for manufacturers looking to enhance their credibility and marketability in the dental sector.
Connect with us, and our expert team will assist you in obtaining a BIS certification for dentistry with compliance.
What Is BIS Certificate For Dentistry?
The BIS certificate for Dentistry is an official certification issued by the Bureau of Indian Standards that verifies that a product complies with the safety and quality standards in India. The grant of the BIS certificate involves rigorous testing and evaluation of products to ensure compliance with relevant standards.
BIS engages in various activities involving product certification, quality control, testing, hallmarking, calibration schemes, etc. BIS certificate protects consumers from hazards by enforcing strict guidelines, promoting consumer confidence, and building trust.
Also Read: Get BIS Certification For Medical Devices
What Is Dentistry?
Dentistry is the specialized instrument dental professionals use to perform various procedures in oral care, facilitating treatment, diagnosis, and management of oral health conditions. Below are some examples of dentistry instruments:
- Explorer: Thin-pointed tool used to detect dental cavities.
- Mirror: To visualize hard-to-see areas of the mouth.
- Chisel: Used for shaping and smoothing tooth structure.
- Burs: Small rotating instruments for polishing teeth.
- Scaling Instrument: Used for removing plaque from teeth.
Who Can Apply BIS Certification For Dentistry?
Below mentioned persons or individuals can apply for a BIS certificate for dentistry:
- Manufacturers producing dentistry instruments can apply for a BIS certificate.
- Importers who want to market and sell dentistry instruments in India can apply for a BIS certificate.
- The distributor can also apply for a BIS certificate, provided he must have the manufacturer’s authorization.
- An authorized representative may submit a BIS certificate application on behalf of the manufacturer, importer, or foreign entity.
You My Also Like: BIS Certification For Medical Electrical Equipment
What Are The Key Benefits Of Obtaining BIS Certificate For Dentistry?
BIS certification for dentistry instruments has several benefits which are mentioned below:
- Quality Assurance: Ensures products have undergone rigorous testing and evaluation, providing quality dental products.
- Regulatory Compliance: Adhere to regulatory standards to ensure legal compliance, which is mandatory for selling medical devices in India.
- International Recognition: Enhances global recognition and unlocks new market opportunities.
- Brand Credibility: Build consumer trust with the ISI Mark, ensuring legal market assessment of the product.
- Patient Safety: Boosts consumer confidence and builds trust in the brand, as the BIS certificate is the assurance of quality and reliability.
- Improved Performance: Reduces chances of product recall from the market or rejection.
Documents Required For Obtaining BIS Certificate For Dentistry
To apply for a BIS certificate for dentistry, an applicant must prepare and submit the following documents:
- Application Form
- Company Documents
- Quality Management System (QMS) Documents
- Product Specification
- Test Reports
- Manufacturing Site Information
- Labelling and Packaging
Procedure To Obtaining BIS Certificate For Dentistry
Following are the steps involved in granting of BIS certificate for dentistry, an applicant must follow these steps:
- Visit BIS Website: Visit the BIS website to understand specific requirements related to your dental products.
- Document Submission: Prepare and submit the required documents as listed above.
- Fee Payment: Pay the required fees based on the type and number of products.
- Inspection: BIS will review the submitted application along with the documents and may conduct an on-site inspection of your manufacturing site.
- Grant of Certification: Once the evaluation is successfully performed, BIS will issue the certificate.
- Post-Certification Surveillance: Regular audits may be conducted to ensure ongoing compliance.
Also Read: BIS Certificate For Surgical Instruments
What Is The Validity Of BIS Certification For Dentistry?
A BIS certificate for Dentistry is typically valid for one year, after which renewal is necessary. Renewal involves a reassessment of compliance with the standards and may require updated documentation and fees.
List Of Indian Standards Of BIS For Dentistry
Here, we have listed down the Indian standards for BIS certification for Orthopaedic Instruments, Implants, And Accessories; you can check them here:
| SI. No. | IS No. | TITLE |
|---|---|---|
| 1 | IS 10011: 2019/ISO 4049: 2009 | Dentistry – Polymer – Based restorative materials (First Revision) |
| (1 Revision) | ||
| 2 | IS 10012: 1981 | Specification for dental zinc oxide/eugenol filling materials |
| 3 | IS 10088: 1981 | Specification for retractor, dental |
| 4 | IS 10309: 1982 | Specification for key, torquing, edgewise |
| 5 | IS 10353: 1982 | Pliers, McKellops’ Type, Dental |
| 6 | IS 10354: 1982 | Specification for torch, alcohol, dental |
| 7 | IS 10663: 2003/ISO 3823-1 | Dental rotary instruments – Steel and carbide burs (First Revision) |
| (1 Revision) | ||
| 8 | IS 10664: 2003/ISO 3823-2 | Dental rotary instruments – Steel and carbide finishing burs (First Revision) |
| (1 Revision) | ||
| 9 | IS 10798: 2019/ISO 4073: 2009 | Dentistry – Information system on the location of dental equipment in the working area of the oral health care provider (First Revision) |
| (1 Revision) | ||
| 10 | IS 10828: 1984 | Pliers, Band Contouring, Dental Johnson’s Pattern |
| 11 | IS 10836: Part 1: 1984 | Pliers, Loop Bending, Dental, Tweed’s Pattern – Part 1 : Fixed Beak, Type 1 |
| 12 | IS 10866: 1984 | Specification for abrasives dental |
| 13 | IS 11044: 1984 | Specification for acrylic trimmers, dental |
| 14 | IS 11045: 1984 | Specification for metal trimmers, dental |
| 15 | IS 11317: 1985 | Specification for shears, laboratory, straight, dental |
| 16 | IS 11394: 1985 | Specification for pliers, distal end cutting, with safety hold, dental |
| 17 | IS 11628: 1986 | Specification for agar impression material |
| 18 | IS 11929: 1986 | Specification for adopters, band, dental |
| 19 | IS 12181: 2018/ISO 7491: 2000 | Dental materials – Determination of colour stability (First Revision) |
| (1 Revision) | ||
| 20 | IS 12374: 2020/ISO 3964: 2016 | Dentistry Coupling Dimensions for Handpiece Connectors ( First Revision ) |
| (1 Revision) | ||
| 21 | IS 12507: 1988 | General requirements for dental pliers |
| 22 | IS 12601: 1989 | Dental instruments – Pliers, lip-safe, flat nose – Specification |
| 23 | IS 12602: 1989 | Dental instruments – Nippers, cutting, carbide tip – Specification |
| 24 | IS 12624: 2018/ISO 6877: 2006 | Dentistry – Root – Canal obturating points (Second Revision) |
| (2 Revision) | ||
| 25 | IS 12721: Part 1: 2005/ISO 6871-1 | Dental base metal casting alloys: Part 1 cobalt – Based alloys (First Revision) |
| (1 Revision) | ||
| 26 | IS 12721: Part 2: 2005/ISO 6871-2 | Dental base metal casting alloys: Part 2 nickel – Based alloys (First Revision) |
| (1 Revision) | ||
| 27 | IS 12764: 2019/ISO 9168: 2009 | Dentistry – Hose connectors for air-driven dental handpieces (Second Revision) |
| (2 Revision) | ||
| 28 | IS 12797: 1989 | Dental materials – Dental glass polyalkenoate cements – Specification |
| 29 | IS 12855: 1989 | Dental materials – Root canal sealing materials – Specification |
| 30 | IS 13701: 2018/ISO 8325: 2004 | Dentistry – Test methods for rotary instruments (First Revision) |
| Dental materials – Dental glass polyalkenoate cement – Specification | ||
| 31 | IS 13710: 1993 | Dental materials – Dental zinc polycarboxylate cements – Specification |
| 32 | IS 17694: 2021/ISO 6874: 2015 | Dentistry Polymer-based pit and fissure sealants |
| 33 | IS 17696: 2021/ISO 13116:2014 | Dentistry- Test Method for Determining Radio-Opacity of Materials |
| 34 | IS 17697: 2021/ISO 22794:2007 | Dentistry- Implantable materials for bone filling and augmentation in oral and maxillofacial surgery Contents of a technical file |
| 35 | IS 17698: 2021/ISO 22803:2004 | Dentistry- Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file |
| 36 | IS 17700: 2021/ISO 14457:2017 | Dentistry Handpieces and motors |
| 37 | IS 17701: 2021/ISO TS 16506:2017 | Dentistry — Polymer-Based Luting Materials Containing Adhesive Components |
| 38 | IS 17702: 2021/ISO 28158:2018 | Dentistry- Integrated dental floss and handles |
| 39 | IS 17703: 2021/ISO 10333-5 | Dentistry- Cartridge syringes |
| 40 | IS 17704: 2021/ISO 17730:2020 | Dentistry Fluoride varnishes |
| 41 | IS 17705: 2021/ISO 29022:2013 | Dentistry- Adhesion Notched edge shear bond strength test |
| 42 | IS 17749: 2021/ISO 7492:2019 | Dentistry Dental explorer First Revision |
| 43 | IS 3875: 1983 | Specification for hot plate, wax levelling, dental (First Revision) |
| (1 Revision) | ||
| 44 | IS 3876: 1985 | Specification for knife, plaster, dental (First Revision) |
| (1 Revision) | ||
| 45 | Dentistry Dental Explorer First Revision | Specification for wax knife, dental |
| 46 | IS 3878: 1967 | Specification for plaster shears, dental |
| 47 | IS 3879: 1967 | Specification for wax spatula, dental |
| 48 | IS 3887: 1978 | General requirements for cutting type dental instruments |
| (1 Revision) | (First Revision) | |
| 49 | IS 3888: 1987 | Specification for spatula, stainless steel, dental (First Revision) |
| (1 Revision) | ||
| 50 | IS 3889: 1985 | Specification for chisels, dental (First Revision) |
| (1 Revision) | ||
| 51 | IS 3890: Part 1: 1986 | Specification for instruments, plastic filling, dental: Part 1 designation numbers 1, 3, 4, 5 and 6 (First Revision) |
| 52 | IS 3890: Part 2: 1967 | Specification for instruments, plastic filling, dental: Part ii designation numbers 12, 20, 21, 46, 47, 153 and 183 |
| 53 | IS 4316: 1991 | Orthodontic pliers, snipe nose – Shape,dimensions and tests (First Revision) |
| (1 Revision) | ||
| 54 | IS 4319: Part 2: 1986 | Specification for pliers, stretching and contouring, dental: Part 2 pliers, contouring (First Revision) |
| (1 Revision) | ||
| 55 | IS 4679: 1968 | Specification for spatula, plaster, dental, curved and straight |
| 56 | IS 4680: 1968 | Specification for spatula, wax, dental, No. 2 |
| 57 | IS 4714: 1985 | Specification for scalers, dental, No. Sc 1/2, 3/4 and 5/6 (First Revision) |
| (1 Revision) | ||
| 58 | IS 4715: 1968 | Specification for excavators, dental, No. Ex 112, 3/4, 516, 718, s/10, 11112 and 13/14 z |
| 59 | IS 4975: 1986 | Specification for elevators, dental, No. 1, 2 and 3 (First Revision) |
| (1 Revision) | ||
| 60 | IS 4976: 1987 | Specification for forceps extraction, dental, upper anteriors No. 1 and 2 (First Revision) |
| (1 Revision) | ||
| 61 | IS 4977: 1968 | Forceps, Extraction, Dental, Lower Molar, Hawk’s Bill, No. 1 |
| 62 | IS 5004: 1968 | Specification for spoons, cutting dental, No. 1/2, 3/4 and 5/6 |
| 63 | IS 5005: 1968 | Specification for burnisher, dental, No. BRN 1/2 |
| 64 | IS 5017: 1968 | Specification for carvers, dental, No. CAR 1/2, 314 and 5/6 |
| 65 | IS 5023: 2003 | Dental units (First Revision) |
| (1 Revision) | ||
| 66 | IS 5178: 1969 | Specification for gingival margin trimmers, dental, No. GMT 1/2,3/14,5/6 and 718 |
| 67 | IS 5179: 1986 | Specification for pluggers, root canal, dental, No. PLG 1, 2 and 3 (First Revision) |
| (1 Revision) | ||
| 68 | IS 5180: 1969 | Specification for needles, hypodermic, dental |
| 69 | IS 5181: 1969 | Specification for press, flask, dental |
| 70 | IS 5185: 1969 | Specification for articulators, dental |
| 71 | IS 5211: 1969 | Specification for scissors, dental No. 1, straight and curved on flat |
| 72 | IS 5212: 1969 | Specification for scissors, crown, dental, straight and curved on flat |
| 73 | IS 5217: 1969 | Specification for clamp, flask, dental |
| 74 | IS 5227: 1969 | Specification for flasks, dental |
| 75 | IS 5541: 1970 | Specification for spatula, plastics, clear and colourless, dental |
| 76 | IS 5576: 1985 | Specification for carriers, amalgam, dental, No. 1 and 2 (First Revision) |
| (1 Revision) | ||
| 77 | IS 5582: 1986 | Specification for mandrels, dental, No. 1, 2 and 3 (First Revision) |
| (1 Revision) | ||
| 78 | IS 5584: 1970 | Specification for syringe, hypodermic, cartridge, dental, pivot breech cap type |
| 79 | IS 5763: 1970 | Specification for occlusal plane guide, dental |
| 80 | IS 5794: 1986 | Specification – For pliers, pin – Roughening and bending, dental (First Revision) |
| (1 Revision) | ||
| 81 | IS 5795: 1991 | Orthodontic pliers, Crown and ligating, Howe’s pattern – Shape, dimensions and tests |
| (1 Revision) | ||
| 82 | IS 5879: 1970 | Specification for punch, rubber dam, dental |
| 83 | IS 5941: 1970 | Specification for dental engine, electric |
| 84 | IS 5965: 1970 | Specification for frame, rubber dam, dental |
| 85 | IS 6020: 2003/ISO 9873 | Dental hand instruments – Reusable mirrors and handles (First Revision) |
| (1 Revision) | ||
| 86 | IS 6035: 1986 | Specification for zinc phosphate dental cement (First Revision) |
| (1 Revision) | ||
| 87 | IS 6036: 1987 | Specification for alginate dental impression (First Revision) |
| (1 Revision) | ||
| 88 | IS 6037: 1970 | Specification for zinc oxide – Eugenol dental impression paste |
| 89 | IS 6038: 1979 | Specification for dental impression (Modellinc) compound (First Revision) |
| (1 Revision) | ||
| 90 | IS 6039: 1970 | Specification for zinc oxide – Eugenol dental cement |
| 91 | IS 6043: 1970 | Specification for copper phosphate – Zinc phosphate dental cement |
| 92 | IS 6116: 1992 | Dental equipment – Dental patient chair – Specification (First Revision) |
| (1 Revision) | ||
| 93 | IS 6116: Part 1:2021/7494- 1:2018 | Dentistry Stationary dental units and dental patient chairs Part 1: General requirements |
| 94 | IS 6292: 1986 | Specification for cotton wool holder, dental (First Revision) |
| (1 Revision) | ||
| 95 | IS 6402: 1986 | Specification for forceps, rubber dam clamp and cotton roll clamp, dental (First Revision) |
| (1 Revision) | ||
| 96 | IS 6404: 1971 | Specification for tweezers, dental, No. 1, 2 and 3 |
| 97 | IS 6462: 1972 | Fitting dimensions for dental burs and cutters |
| 98 | IS 6525: 1972 | Specification for syringe, hypqdermic, Dental for interchangeable needles |
| 99 | IS 6555: 1972 | Specification for dental laboratory plaster |
| 100 | IS 6811: 1972 | Specification for syringe, water, self – Filling, dental |
| 101 | IS 6814: 1972 | Specification for syringe, air and water, dental |
| 102 | IS 6815: 1972 | Specification for retainers, matrix, dental, No. 1 and 2 |
| 103 | IS 6822: 1972 | Cutter, Distal Arch Wire, Dental |
| 104 | IS 6823: 1972 | Specification for forceps, extraction, dental, lower molars |
| 105 | IS 6824: 1972 | Specification for forceps, extraction, dental, lower wisdom tooth |
| 106 | IS 6825: 1972 | Specification for forceps, extraction dental upper cuspids and bicuspids |
| 107 | IS 6826: 1972 | Specification for forceps, extraction, dental, lower incisors, cuspids and bicuspids, left |
| 108 | IS 6827: 1972 | Specification for forceps, extraction, dental, upper molars, left |
| 109 | IS 6828: 1972 | Specification for forceps, extraction, dental, upper molars, right |
| 110 | IS 6829: 1991 | Dental instruments – Orthodontic pliers, angle wire bending- Shape, dimensions and tests (First Revision) |
| (1 Revision) | ||
| 111 | IS 6846: 1972 | General requirements for the control unit for air turbine, dental |
| 112 | IS 6856: 1972 | Forceps, Extraction, Dental, Upper Root, Narrow Beak |
| 113 | IS 6858: 1972 | Specification for forceps, extraction, dental, lower incisors, cuspids and bicuspids |
| 114 | IS 6859: 1972 | Specification for forceps, extraction, dental, upper root, wide beak |
| 115 | IS 6866: 1986 | Specification for forceps, extraction, dental, upper wisdom tooth (First Revision) |
| (1 Revision) | ||
| 116 | IS 6867: 1972 | Specification for forceps, extraction, dental, upper root, medium beak |
| 117 | IS 6868: 1991 | Dental instruments – Dental extraction forceps – Specification (First Revision) |
| (1 Revision) | ||
| 118 | IS 6870: 1986 | Specification for pliers, loop bending, dental (First Revision) |
| (1 Revision) | ||
| 119 | IS 6882: Part 2: 2018/ISO 20795-2: 2013 | Dentistry – Base Polymers Part 2 Orthodontic Base Polymers ( First Revision ) |
| 120 | IS 6887: Part 2: 2018/ISO 20795-2: 2013 | Dentistry — Base Polymers Part 2 Orthodontic Base Polymers ( First Revision ) |
| (3 Revision) | ||
| 121 | IS 6888: 1986 | Specification for dental inlay casting wax (First Revision) |
| (1 Revision) | ||
| 122 | IS 7066: 1973 | Specification for trays, instrument – Cabinet, dental |
| 123 | IS 7333: 1991 | Orthodontic pliers, spring forming – Shape and dimensions (First Revision) |
| (1 Revision) | ||
| 124 | IS 7334: 1988 | Specification for pliers, clasp adjusting, dental (First Revision) |
| (1 Revision) | ||
| 125 | IS 7335: 1974 | Specification for pliers, closing loop, nance type, dental |
| 126 | IS 7338: 1991 | Orthodontic pliers, band removing, posterior – Shape and dimensions (First Revision) |
| (1 Revision) | ||
| 127 | IS 7340: 1974 | Specification for pliers, pin and ligature cutting, dental |
| 128 | IS 7348: Part 1: 2003/ISO 1942:2009 | Dental vocabulary: Part 1 general and clinical terms |
| 129 | IS 7348: Part 2: 2003/ISO 1942-2 | Dental vocabulary: Part 2 dental materials (First Revision) |
| (1 Revision) | ||
| 130 | IS 7348: Part 3: 2003/ISO 1942-3 | Dental vocabulary: Part 3 dental instruments (Second Revision) |
| (2 Revision) | ||
| 131 | IS 7348: Part 4: 1994/ISO 1942-4 | Dental vocabulary: Part 4 dental equipment (Second Revision) |
| (2 Revision) | ||
| 132 | IS 7348: Part 5: 1994/ISO 1942-5 | Dental vocabulary: Part 5 terms associated with testing |
| 133 | IS 7425 : 1974 | Specification for dental casting investment for gold alloys |
| 134 | IS 7467: 1974 | Specification for bands, matrix, dental, No. 1 and 2 |
| 135 | IS 7474: 1986 | Specification for pliers, collar, dental (First Revision) |
| (1 Revision) | ||
| 136 | IS 7476: 1974 | Specification for nippers, cutting, dental |
| 137 | IS 7627: 1975 | Gag, Mouth, Mason’s Pattern |
| 138 | IS 7676: 1975 | Specification for chisel, osseous, dental |
| 139 | IS 7677: 1986 | Specification for exolevers, apical, dental |
| (1 Revision) | ||
| 140 | IS 7780: 1975 | Specification for pliers, ligature forming, dental |
| 141 | IS 7781: 1975 | Specification for pliers, angle ribbon arch with groove, dental |
| 142 | IS 7833: 1975 | Specification for knives, Gingivectomy, Dental |
| 143 | IS 7853: 1975 | Specification for surveyor, cast, dental |
| 144 | IS 7966: 1976 | Specification for dental modelling wax |
| 145 | IS 8019: 1976 | Specification for dental artificial stone |
| 146 | IS 8020: 1976 | Specification for baseplate, dental |
| 147 | IS 8021: 1975 | Specification for dental sticky wax |
| 148 | IS 8022: 1976 | Specification for acrylic resin teeth |
| 149 | IS 8044: 1976 | Specification for forceps, extraction, dental, lower molar, children |
| 150 | IS 8045: 1976 | Specification for forceps, extraction, dental, lower incisors and canines, children |
| 151 | IS 8046: 1976 | Specification for forceps, extraction, dental, upper incisors and canines, children |
| 152 | Specification for acrylic resin teeth | Specification for forceps, extraction, dental, upper molar, children |
| 153 | IS 8047: 1976 | Specification for forceps, rongeur, dental |
| 154 | IS 8207: 1976 | Specification for tweezers, soldering |
| 155 | IS 8283: 1976 | Pusher, Band, Dental, Mershon’s Pattern |
| 156 | IS 8284: 1976 | Specification for pliers, band stretching and contouring, parrot beak, dental (First Revision) |
| (1 Revision) | ||
| 157 | IS 8346: 2018/ISO 7493: 2006 | Dentistry — Operator’s Stool ( Second Revision ) |
| (2 Revision) | ||
| 158 | IS 8287: 1986 | Specification for tweezers, extraction, dental |
| 159 | IS 8527: 1977 | Specification for pliers, anterior band forming, double beak, dental (First Revision) |
| (1 Revision) | ||
| 160 | IS 8528: 1988 | Dentalinstruments – Pliers,posterior band forming,double beak specification (First Revision) |
| (1 Revision) | ||
| 161 | IS 8529: 1989 | Specification for dental porcelain |
| 162 | IS 8815: 2019/ISO 3950: 2016 | Dentistry – Designation system for teeth and areas of the oral cavity (Second Revision) |
| (2 Revision) | ||
| 163 | IS 8850 : 1978 | Guide for use of dental materials |
| 164 | IS 8850: 1978 | Specification for autopolymerizing (Acrylic) resins for dental use |
| 165 | IS 8864: 1978 | Dental instruments – Pliers, ligature tying – Specification (First Revision) |
| (1 Revision) | ||
| 166 | IS 8948: 1989 | Dental Instruments – Pliers, Curved, Howe’s Pattern |
| (1 Revision) | ||
| 167 | IS 8949: 1989 | Specification for acrylizer (Curing Unit) |
| 168 | IS 9003: 1978 | Specification for chisel, dental, large |
| 169 | IS 9699: 1981 | Specification for trays, impression, dental |
| 170 | IS 9717: 1980 | Specification for pliers, bracket opening, dental |
| 171 | IS 9774: 1981 | Specification for recommendations for lighting of dental operatories |
| 172 | IS 9932: 1981 | Specification for trimmers, electrically operated, for dental models |
| 173 | IS/ISO 10139: Part 1: 2018/ISO 10139-1:2018 | Dentistry — Soft Lining Materials for Removable Dentures Part 1 Materials for Short-term Use |
| 174 | IS/ISO 10139: Part 1 : 2018/ISO 10139-1:2018 | Dentistry — Soft Lining Materials For Removable Dentures Part 1 Materials for Short-term Use |
| 175 | Dentistry — Soft Lining Materials For Removable Dentures Part 2 Materials for Long-term Use | Dentistry Contents of technical file for dental implant systems |
| 176 | IS/ISO 10873 : 2010/ISO 10873:2010 | Dentistry — Denture Adhesives |
| 177 | IS/ISO 10873: 2010/ISO 10873:2010 | Dentistry — Implants — Clinical performance of Hand Torque Instruments |
| 178 | IS/ISO 21563: 2013/ISO 21563:2013 | Periodontal curettes dental scalers and excavators Part 1: General requirements |
| 179 | Dentistry — Implants — Clinical Performance of Hand Torque Instruments | Dentistry — Implants — Dynamic Loading Test for Endosseous Dental Implants |
| 180 | IS/ISO 14801: 2016/ISO 14801:2016 | Dental alginate impression material |
| 181 | IS/ISO 15798: 2013/ISO 15798:2013 | Ophthalmic implants – Ophthalmic viscosurgical devices |
| 182 | IS/ISO 1563: 1990 | Dentistry Test methods for dental unit waterline biofilm treatment |
| 183 | IS/ISO 16954: 2015/ISO 16954:2015 | Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer- based restorative materials |
| 184 | Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials | Dentistry Osteotome |
| 185 | IS/ISO 1797 : 2017/ISO 1797:2017 | Dentistry – Shanks for rotary and oscillating instruments |
| 186 | IS/ISO 17937: 2015/ISO 17937:2015 | Dentistry Orthodontic anchor screws |
| 187 | IS/ISO 19023: 2018/ISO 19023:2018 | Dentistry Sinus membrane elevator |
| 188 | IS/ISO 19490: 2017/ISO 19490:2017 | Dentistry – Hydrocolloid impression materials |
| 189 | IS/ISO 2157: 2016/ISO 2157:2016 | Dentistry – Nominal diameters and designation code numbers for rotary instruments (First Revision) |
| (1 Revision) | ||
| 190 | IS/ISO 21672: Part 1: 2012/ISO 21672-1:2012 | Dentistry Periodontal probes Part 1: General requirements |
| 191 | IS/ISO 21672: Part 2: 2012/ISO 21672-2:2012 | Dentistry Periodontal probes Part 2: Designation |
| 192 | Dentistry Periodontal Probes Part 2: Designation | Dentistry – Metallic materials for fixed and removable restorations and appliances |
| 193 | IS/ISO 22674: 2016/ISO 22674:2016 | Dentistry – Dental amalgam |
| (1 Revision) | ||
| 194 | IS/ISO 27020: 2019/IEC 60071-5: 2014 | Dentistry Brackets and tubes for use in orthodontics |
| 195 | IS/ISO 6360: Part 1: 2004/ISO 6360-1:2004 | Dentistry — Number coding system for rotary instruments — Part 1: General characteristics |
| 196 | IS/ISO 24234: 2015/ISO 24234:2015 | Dentistry – Number Coding System For Roatry Instruments Part 2 Shapes |
| 197 | IS/ISO 6360: Part 5: 2007/ISO 6360-5:2007 | Dentistry Number coding system for rotary instruments Part 5: Specific characteristics of root-canal instruments |
| 198 | IS/ISO 6873 : 2013/ISO 6873 :2013 | Dentistry – Gypsum products (First Revision) |
| IS/ISO 6360: Part 5 : 2007/ISO 6360-5:2007 | ||
| 199 | IS/ISO 6876: 2012/ISO 6876:2012 | Dentistry – Root canal sealing materials (First Revision) |
| (1 Revision) | ||
| 200 | IS/ISO 10451: 2010/ISO 10451:2010 | Dentistry – Base Polymers Part 1 Denture Base Polymers ( First Revision ) |
| 201 | IS/ISO 6887: Part 1: 2018/ISO 20795 (Part 1): 2013 | Dental explorers |
| 202 | IS/ISO 7492: 1997 | Dental rotary instruments Laboratory abrasive instruments |
| 203 | IS/ISO 9917: PART 1:2007/ISO 9917-1:2007 | Dentistry — Water-Based Cements Part 1 Powder/Liquid Acid-Base Cements ( First Revision ) |
| (1 Revision) | ||
| 204 | IS/ISO 7786: 2001/ISO 7786:2001 | Dentistry – Water – Based cement: Part 2 resin – Modified cements (First Revision) |
| (1 Revision) | ||
| 205 | IS/ISO 9917: PART 2 :2017/IS/ISO 9917-2:2017 | Digital codification of dental laboratory procedures |
Why Choose ELT Corporates For Obtaining BIS Certificate For Dentistry?
At ELT Corporates, we understand the whole process of obtaining a BIS certificate along with the regulatory requirements. Our expert team can make the process easier for our clients through in-depth guidance and support, ensuring you understand each step of the certification process.
From initial consultation to certification issuance, we will be with you every step of the way, ready to address any challenge that may arise. With our support, you will not only obtain a BIS certification for Dentistry but also gain a competitive edge in the market, showcasing your commitment to quality and compliance.
What Types Of Dental Products Requires BIS Certificate?
Standard dental products require a BIS certificate including mirrors, chisel, burs, scaling instruments, and many more.
Is BIS Certificate Needed For Dental Products?
Yes, BIS certificate is needed for dental products to ensure they are safe, and must establish quality standards. It is often mandatory for market access of products.