BIS Certification For Room Heater

September 23, 2024September 23, 2024| ELT TeamBIS Certification For Room Heater| 9:00 pm
bis certification for room heater

Know how to get BIS Certification for Room Heater and position your products as the go-to choice in this massive competitive market. In this crowded and competitive marketplace, having BIS certification for your products can be the ticket to standing out and gaining consumer trust.

Obtaining BIS certificate for room heater will also assure customers that it complies with the highest safety, quality, and performance standards. In this guide, we will walk you through the complete process of obtaining BIS certification, from understanding the essential requirements to navigating the application procedure. Let’s get started!

What Is BIS?

The BIS was established by the Government of India under the BIS Act of 1986, shown after the International Organization for Standardization (ISO). Operating under the Ministry of Consumer Affairs, Food & Public Distribution, BIS serves as the national standards body in India.

Its primary role is to develop and promote Indian Standards, certify products for both domestic and foreign manufacturers, and certify various management systems, including Quality Management Systems (QMS), Environmental Management Systems, Food Safety Management Systems, and more.

What Is A Room Heater?

A room heater, also known as an electric radiator, is a simple and energy-efficient way to keep your home warm. It works by using a special fluid, like oil, that heats up when electricity flows through it, producing warmth. Most room heaters come with a built-in thermostat, which helps control the amount of energy used, ensuring your home stays at a comfortable temperature without wasting electricity.

Room heaters are generally divided into two categories:

  • Group I: Heaters with power up to and including 1000 watts (W)
  • Group II: Heaters with power above 1000 watts (W)

These heaters are designed to be safe for use in homes and similar places, following specific safety standards. They are suitable for appliances with a maximum voltage of 250 volts for single-phase devices and 415 volts for others.

Documents Required To Obtain BIS Certification For Room Heater Manufacturers

To obtain BIS ISI certification for room heaters manufacturers in India, the following documents are essential:

  • Technical Specifications of the Product
  • Company Registration Certificate
  • Manufacturing Process Flow Chart
  • Trademark Registration
  • List of Manufacturing Equipment
  • Outsourced Quality Control Documents
  • Packing and Storage Information
  • Map Location
  • Quality Control Team Information
  • Test Reports for Raw Materials and Parts
  • Original Test Report from BIS Approved Laboratory
  • Internal Testing Facility List

Also Read: BIS Hallmark Registration

Process To Get BIS Certification For Room Heater Manufacturers

Here’s a step-by-step breakdown of what manufacturers need to do to obtain BIS certification for their products:

  • Sample Testing: The process kicks off with testing. Manufacturers need to send samples of their room heaters to testing laboratories. These labs will evaluate the samples to ensure they meet the necessary BIS standards for safety and performance.
  • Document Preparation, Review & Submission: Manufacturers must prepare detailed documentation that outlines the design specifications, manufacturing processes, and quality control measures. This documentation is thoroughly reviewed to make sure everything aligns with BIS requirements.
  • Application Review: Once the documents are ready, they are submitted to BIS for a detailed review. A BIS reviewing officer will verify the test reports and other submitted materials to ensure that the room heaters meet all the necessary IS norms.
  • Factory Inspection: To further ensure compliance, BIS officials may visit the manufacturing facility. During this inspection, they will closely examine the production processes to verify that they are up to the mark and in line with the prescribed standards.
  • Grant of BIS Certification: If everything checks out, the documents are in order, test reports are satisfactory, and the factory inspection is successful. Then you’ll get the BIS certification for Room Heater. Once received, you can proudly display the BIS ISI Standard mark on your room heaters.

By following these steps, you can complete the BIS registration process efficiently and increase your product credibility in the market.

Also Read: ISI Certification For Electric Immersion Water Heater

Importance Of BIS Certificate For Room Heater

BIS certification plays a crucial role in ensuring the safety, quality, and reliability of room heaters. Here’s why obtaining BIS certification is so important:

  • Safety Assurance: BIS certification ensures that room heaters meet rigorous safety standards. This reduces the risk of electrical hazards, such as short circuits or overheating. Hence, helps in protecting users from potential accidents and injuries.
  • Quality Control: The certification process includes thorough testing and inspection, which guarantees that room heaters perform efficiently and meet quality benchmarks. This means consumers can rely on the durability and effectiveness of the product.
  • Regulatory Compliance: For manufacturers, BIS certification is a compliance requirement under Indian regulations. It helps avoid legal issues and ensures that products meet the mandatory standards set by Indian authorities.
  • Consumer Trust: The BIS mark on a room heater serves as a mark of quality and reliability, enhancing consumer confidence. It signifies that the product has been tested and approved by a recognized authority, making it a preferred choice for buyers.
  • Market Access: BIS certification can facilitate easier entry into the Indian market. Retailers and distributors often prefer products with certification to meet regulatory requirements and consumer expectations.
  • Competitive Advantage: Certification sets a product apart from non-certified alternatives. It can be a strong selling point in marketing and promotion, giving manufacturers a competitive edge in the marketplace.

Things To Remember While Using Room Heaters

Here are a few important points to keep in mind before using room heaters:

  • Keep Away from Children and Pets: Always place room heaters out of reach to ensure the safety of kids and pets.
  • Choose BIS ISI Certified Heaters: Make sure to buy room heaters that are BIS ISI certified, ensuring they meet the necessary safety standards.
  • Avoid Water Exposure: Place your room heater away from water sources to prevent electrical hazards.
  • Plug Directly into the Wall Outlet: Always plug your heater directly into a wall socket, avoiding the use of extension cords to reduce fire risks.
  • Don’t Overload the Socket: Ensure the socket isn’t overloaded with multiple appliances to prevent electrical fires.
  • Do Not Leave Unattended: Never leave a room heater running for long periods when you’re not around.
  • Regularly Inspect and Maintain: Check your heater regularly for any signs of wear or damage and keep it well-maintained for safe use.

Required Tests To Get BIS Certification For Room Heaters

To ensure that room heaters meet the necessary safety and quality standards, the following tests must be conducted:

  1. Earth Continuity Test
  2. Electric Strength Test
  3. Functional Test
  4. Protection Against Access to Live Parts
  5. Provision for Earthing
  6. Power Input and Current
  7. Leakage Current and Electric Strength at Operating Temperature
  8. Heating Test
  9. Moisture Resistance Test
  10. Leakage Current and Electric Strength Test
  11. Transient Overvoltage Test
  12. Mechanical Strength Test
  13. Overload Protection of Transformers and Associated Circuits
  14. Abnormal Operation Test
  15. Stability and Mechanical Hazards Test
  16. Construction Test
  17. Internal Wiring Test
  18. Components Test
  19. Supply Connection and External Flexible Cords Test
  20. Terminals for External Conductors Test
  21. Screws and Connections Test
  22. Clearances, Creepage Distances, and Solid Insulation Test
  23. Resistance to Heat and Fire Test
  24. Resistance to Rusting Test

These tests are essential to ensure that room heaters conform to safety and performance standards before they reach the market.

Also Read: BIS Certification For Copper Products

What Is The HSN Code For Electric Room Heater?

The HSN Code for the electric room heater is 8516. This code also involves electric soil heating devices, electric instantaneous, immersion heaters, and various other similar appliances.