BIS Certification For Electronic Clocks With Mains Power [IS 302-2-26:2014]

The demand for electronics and electronic devices has increased in today’s modern world, specifically devices like electronic clocks that run on mains power. Most people prefer electronic clocks in their homes and offices for timekeeping. As these products’ usage increases, it is important to ensure safety and quality. As the use of these products grows, it becomes important to guarantee their safety, quality, and environmental impact. This is where the Bureau of Indian Standards certification becomes important for the BIS Certificate for Electronic Clocks with Mains Power.

What Is BIS Certificate?

The Bureau of Indian Standards (BIS) is the national regulator in India, responsible for standards for a wide range of products, including electronic devices The BIS certificate confirms that the product is of good quality and safe to use.

For the BIS Certificate for electronic clocks with mains power, this certificate confirms that the product is safe for the consumer. The BIS certificate provides manufacturers a license to the consumer for awareness that the product is of good quality, safe to use, and environmentally friendly.

Why Is BIS Certification Important For An Electronic Clock With Mains Power?

There are various importance of obtaining BIS certification for electronic clocks with mains power, listed below:

1. Consumer Safety: The primary goal of the BIS Certificate is to protect consumers; electronic clocks with mains power are connected to the electrical grid, which brings with it the potential of electronic shocks, fire, or manufacturing, The certificate confirms that the product is passed all the safety guidelines 
2. Compliance with standards: BIS standards as per IS 302-2-26 for safety guidelines for electronic devices. These standards confirm that the product performs well over time and doesn’t harm consumers.
3. Trust And Reliability: The presence of the BIS mark is a sign of trust. It tells that the manufacturers know all the guidelines and are certified for production. For the consumer, this mark shows that the consumer purchases a good-quality product.
4. Regulatory Requirement: In India, some electronic products, especially those products that are powered by electricity, are mandated by guidelines of BIS Certification; this helps regulatory bodies monitor to safety and quality of products.
5. Global Competitiveness: In a global market, manufacturers need to show that their product meets international standards. The BIS certificate acts as a treatment for quality and confirms that the product can compete in both domestic and international markets.

Benefits Of Obtaining BIS Certification For Electronic Clock with Mains Power

Getting BIS certification offers several significant benefits for manufacturers, exporters, and consumers. Some of the key benefits are mentioned below.

• Increase Market Access: The BIS certificate allows manufacturers to access a big market, including both government and private sector purchases.
• Brand Reputation: Receiving a BIS certificate can enhance the manufacturer’s brand to show consumers the quality of their product.
• Legal Protection: The  Certificate gives legal protection in case of disputes related to product quality and safety. 

Guidelines For The Nomination Of Authorized Indian Representative (AIR)

The Nomination Of an authorized Indian representative is required for foreign manufacturers to obtain BIS certification for products sold in India. Here are the key guidelines for nominating an Air:

•  If the manufacturer has a link or a branch office in India, it will be designed as the AIR. 
•  If no link or branch office exists, the proprietor or registered user of the brand/trademark in India becomes the AIR.
•  If neither exists, Another entity can be designed as the AIR. 

Process To Get BIS Certificate For Electronic Clocks With Mains Power [IS 302-2-26:2014]

The process to obtain BIS certification for electronic clocks with mains power typically involves the following steps 

1. Application Submission: The manufacturer has to submit an application along with technical specifications, a test report, and required documents to BIS. 
2. Product Testing: The product goes testing in a BIS laboratory to make sure it meets relevant Indian standards.
3. Factory inspection: BIS may inspect the manufacturing facility to verify the quality process is going under the following guidelines and that the product is going with the required standards.
4. Granting of BIS license: If the product meets all the requirements, BIS grants the manufacturers a license to use the BIS mark on the product. The manufacturer is then authorized to sell the products with the BIS Certification.
5. Ongoing Compliance: After receiving certification, manufacturers must maintain quality through regular audits and inspections to ensure Continued compliance with the standards.

Documents Required To Get BIS Registration For Electronic Clocks With Mains Power [IS 302-2-26:2014]

To obtain BIS (Bureau of Indian Standards) registration for a product, the following documents are generally required mentioned below :

• Filled CDF/CCF form.
• Duly filled BIS application form.
• Business license of a manufacturing unit (In English and local language).
• Scope of business license (in English language and local language).
• ISO Certificate for the manufacturing.
  Marking label / Details of making on the product.
  Authorization letter (if the signatory is not the head of manufacturing). 
• Trademark certificate. 
• Trademark Authorization Letter (if another entity owns the trademark.
  Authorized Indian Representative company registration proof (foreign manufacturers).
• Photo ID of Authorized India Representative / Authorized Signatory.
  Technical Specification sheet of Product /user Manual (Document checklist).

Also Read: BIS Certification For Electronic Mouse

Key Points To Get BIS Certificate For Electronic Clocks With Mains Power

To get a BIS Certification for Electronic Clocks With Mains Power, here are the key points to keep in mind.

• Ensure BIS approves the testing laboratory and has an approved license.
• Make sure that the laboratory license is valid and not suspended and that it is not undergoing an audit.
• Get a complete shipment from the manufacturer’s location to the testing laboratory.
• All documents should be signed and stamped by the manufacturer, brand owner, and India representative. 
• Make sure accurate details and entries are in the Construction Data Form (CDF) and Critical Component List (CCL).
• Submit the test report to BIS within 90 days of testing; a new sample must be tested. 
• Make sure all documents are ready before sample testing. 
• BIS normally takes 15 days to approve the registration, but it can extend to 30-60 days.

Why Choose ELT Corporate For BIS Certification For Electronic Clocks With Mains Power 

If you need a BIS Certificate for Electronic Clocks with Mains Power, ELT Corporate can help. As a leading BIS certification consultant, we assist manufacturers and importers with professional and timely BIS registration, providing expert guidance throughout the process.