BIS Certification For TPMS Valves

With increasing focus on road safety, advanced motor vehicle components are becoming mandatory in India. One such important component is TPMS valve, which plays an important role in monitoring and maintaining tire pressure. To ensure safety, quality and compliance, the TPMS valves come under the purview of BIS  certification. This is necessary for certification manufacturers, importers and suppliers to sell these components legally in the Indian market.

In this blog, we will run you through the importance, process and benefits of obtaining BIS certification for TPMS valves.

What is BIS Certification?

The Bureau of Indian Standards is a national body responsible for standardization, quality certification and marking of products in India. Under the Compulsory Registration Scheme and ISI Certification Scheme, BIS ensures that products meet safety, performance and quality standards.

For automotive parts such as TPMS valves, certification regulatory requirements under the BIS scheme, ensure better security on Indian roads and compliance with the consumer trust.

Read More: Introduction To Bureau Of Indian Standards

What is a TPMS Valve?

A TPMS valve (tire pressure monitoring system valve) is a small but important device that monitors tire pressure and alerts drivers when the pressure falls below the safe range. It is usually integrated into vehicles:

• Stop tire blowout
• Improve fuel efficiency
• Increase driving security
• Extend tire life

Since TPMS valves directly affect security, their compliance of Indian standards through BIS certification is mandatory.

Why is BIS Certification Mandatory for TPMS Valves?

BIS Certification is mandatory for TPMS (Tire Pressure Monitoring System) valve to ensure road safety and regulatory compliance in India.

• Security compliance: TPMS valves are important motor vehicle safety parts. BIS ensures that they meet the Indian Security Benchmark.
• Regulatory requirement: According to the government’s quality control order (QCO), the TPMS valve cannot be imported, manufactured or sold into India without BIS approval.
• Consumer Trust: BIS-certain products take the ISI Mark, assuring authenticity and reliability.
• Market access: BIS certification is a legal requirement for both domestic and imported TPMS valves in India.

Technical Note: Indian Standards notified for TPMS valves IS/ISO 18885-3: 2021- “TPMS valves”, which defines requirements for performance, durability, safety and quality. While other automotive valves and cap are under 9081 and are 9453, the TPMS valve is specifically regulated under IS/ISO 18885–3: 2021.

Applicable Indian Standard for TPMS Valves

The standard motor vehicle industry standards (AIS) or relevant Indian standards (IS) applied to the TPMS valve have been notified by BIS. Usually, these standard cover:

• Design requirements
• Physical quality
• Functional reliability
• Safety test

Manufacturers/importers must follow the specified standard IS standard to obtain BIS certification.

Process of BIS Certification for TPMS Valves

The BIS Certificate For TPMS Valves process generally follows two main routes:

1. ISI Certification Scheme (For Indian Manufacturers)

Step 1: Application Submission – File an application with BIS through the Manakonline portal.

Step 2: Product Testing – Submit samples to BIS-recognized labs for testing against the relevant IS standard.

Step 3: Factory Inspection – BIS officials inspect the manufacturing facility to verify quality control systems.

Step 4: Grant of License – Upon compliance, BIS issues a license to use the ISI Mark.

2. Foreign Manufacturers Certification Scheme (FMCS)

For overseas manufacturers exporting TPMS valves to India:

• Appoint an Authorized Indian Representative (AIR).
• Submit an application and samples for BIS testing.
• BIS conducts factory inspections abroad.
• Certification granted under FMCS with ISI marking approval.

Read More: Process for getting BIS for Certification

Documents Required for BIS Certification of TPMS Valves

Below we mentioned required documents for BIS Certificate For TPMS Valves

• Application form (Manakonline)
• Test reports from BIS-recognized labs
• Factory license and layout plan
• Quality control documents (SOPs, raw material checks, calibration details)
• Authorization letter for AIR (in case of foreign manufacturers)
• Proof of business registration (GST, incorporation certificate, etc.)

Read More: Documents Required For BIS Registration

Validity and Renewal

The validity of BIS certification for TPMS valve is usually 2 years from the date of the issue. After this period, manufacturers or importers must apply for renewal to sell or import certified products.

1. Renewal Process:

• Submit an application for renewal before the end of the current license.
• Provide updated test reports (if necessary) and compliance documents.
• Pay the prescribed renewal fee.

2. Validity of renewal: BIS can renew up to 5 years, depending on continuous compliance and quality standards.
3. Non-renovation: If certification laps, the manufacturer/importer cannot sell the product in the Indian market until the certification is re-obtained.

Benefits of BIS Certification for TPMS Valves

Below we mentioned some benefits BIS Certificate for TPMS Valves

• Legal compliance-Ensures trouble-free business in India.
• Market Recognition – ISI Mark creates consumer trust.
• Promoted Safety – Compliance with Indian Safety Standards.
• Professional Development – OEM opens out access to government tenders and retail markets.
• Low risk – Product reduces the possibility of recall or punishment.

Penalties for Non-Compliance

• Selling TPMS valves without BIS certification can lead to:
• Heavy fines under the BIS Act, 2016
• Seizure of goods from the market
• Legal action and business restrictions

How ELT Corporate Can Help

At ELT Corporate, we specialize in BIS Certification services for electronic products, including power banks. We offer:

• End-to-end application support
• Testing coordination with BIS labs
• Documentation & portal filing
• Post-certification compliance advisory

Conclusion 

The motor vehicle sector in India is moving rapidly towards advanced security standards. For manufacturers and importers of TPMS valves, obtaining BIS certification is not just a legal requirement, but also a mark of quality, safety and trust. By ensuring compliance with BIS, businesses can strengthen their market presence, create confidence, and contribute to safe roads in India.

If you are a manufacturer, importer or distributor of TPMS valves, now is the time to ensure that your products are certified to avoid legal complications and unlock opportunities for development.