Taped roller bearings are one of the most widely used components in motor vehicle, industrial and engineering applications. They provide the necessary load-bearing capacity, durability and efficiency in heavy machinery, railway axles and vehicles. In India, to ensure quality, security and reliability, the Bureau of Indian Standards (BIS) has made it mandatory for some categories, including taped roller bearings, to be certified before selling or imported in the Indian market.
This blog explains the importance, process, and benefits of obtaining BIS certification for rapid roller bearings.
Why BIS Certification for Tapered Roller Bearings Necessary?
Below we mentioned why is BIS Certificate for Tapered Roller Bearings is Necessary:
- Quality and safety ensures – BIS certification guarantees that bearings correspond to the standard (Indian standard) for design and performance.
- Compulsory Compliance – According to BIS Compulsory Registration Scheme (CRS) and QCO information, some bearings fall under compulsory BIS licensing.
- Smuth Market Access – Without BIS certification, manufacturers or importers cannot sell or distribute legally taped roller bearings in India.
- Trust and reliability- a BIS-identified product increases customer’s trust and increases brand value.
Applicable Standards for Tapered Roller Bearings
BIS certification for bearings is generally issued under the ISI Mark Scheme. The Indian Standards (Code) applied to tapped roller bearings may be included:
- 9 Specification for slim roller bearings
- Additional products are standard for testing, material and performance based on specifications.
Note: The exact standard is confirmed during the application phase based on the product category.
Who Can Obtain BIS Certification?
The following institutions are eligible to apply for BIS Certification for slim roller bearings:
- Indian manufacturer – Any factory producing thin roller bearings within India can apply directly to BIS.
- Foreign Manufacturers – Companies outside India can also obtain BIS certification through foreign manufacturer certification scheme (FMCs). They have to appoint an authorized Indian representative (air) to contact with BIS.
- Importers and traders – Importers may not directly receive BIS certification unless they are the owner of a manufacturing unit. However, they should ensure that their foreign supplier is certified BIS before importing taped roller bearings in India.
- OEMS and industrial suppliers – using bearings in large-scale production (automobile, railway, machinery) often coordinate with manufacturers to ensure BIS-identity supply.
Step-By-Step Process BIS Certification for Tapered Roller Bearings
Step-by-step process to obtain BIS Certificate for Tapered Roller Bearings:
The certification process under the ISI Mark Scheme includes several stages:
1. Submit application: Manufacturers or importers need to file an application on the BIS standard online portal.
2. Product test: To ensure compliance with relevant IS standards, tapard roller bearings should be tested in BIS-recognized laboratory.
3. Factory inspection: BIS officials perform an on-site of manufacturing facility to verify test infrastructure, quality control processes and production capacity.
4. License grant (GOL): If products and factory compliance with BIS requirements, BIS issues a license to use ISI mark on a thin roller bearings.
5. Post-proof monitoring: BIS inspects factories and testing samples from the market to ensure continuous compliance with time -time.
Read More: Process for getting BIS for Certification
Documents Required for BIS Certification
To apply for BIS certificate for tapard roller bearings, the following documents are required:
- Factory Registration Documents (Company Correction Certificate, MSME, etc.)
- Proof of manufacturing unit (address, layout, machinery list)
- Details of quality control personnel and equipment
- Products, specifications and test reports
- Trademark registration (if applicable)
- Authority letter (for Indian representative in case of foreign manufacturers)
Read More: Documents Required For BIS Registration
Validity and Renewal of BIS License
- The BIS license for tapered roller bearings is valid for two years initially.
- It can be renewed for up to five years upon submission of renewal fees and updated documents, provided there are no compliance violations.
Benefits of BIS Certification for Tapered Roller Bearings
Below we mentioned benefits of BIS Certificate for Tapered Roller Bearings
- Legal Compliance – Mandatory for selling in India.
- Competitive Advantage – Builds trust with OEMs, distributors, and end-users.
- International Recognition – BIS-certified products gain higher acceptance in global trade.
- Reduced Rejections – Assurance of quality reduces market complaints and rejection rates.
Penalty for non-transportation
BIS can attract selling or importing taped roller bearings without certification:
- Heavy fines and punishment under BIS Act, 2016.
- Seizure of non-functioned items.
- Possible legal action against manufacturer or importer.
Conclusion
BIS certification for slim roller bearings is not only a legal requirement, but also a mark of quality and reliability. With an increase in industrial demand, ensuring compliance with BIS standards helps manufacturers and importers to reach the Indian market easily by creating reliability with customers.
If you are an importer of a manufacturer or slim roller bearings, it is advisable to take professional assistance in coordinating with BIS to prepare documents, prepare documents and avoid delay and rejection.
Is BIS Certification mandatory for Tapered Roller Bearings in India?
Yes, BIS Certification is mandatory to ensure safety, quality, and compliance with Indian standards.
Which standard applies to Tapered Roller Bearings under BIS?
Tapered Roller Bearings must comply with IS 2399 to obtain BIS Certification.
Who issues BIS Certification for Tapered Roller Bearings?
The Bureau of Indian Standards (BIS) issues the certification after product testing and inspection.
